Home > categories > Construction & Real Estate > Other Soundproofing Materials > What is the best sound insulation decoration
Question:

What is the best sound insulation decoration

What is the best sound insulation decoration

Answer:

The higher the hardness of the material, the better the sound insulation. The most common method of decoration is light steel keel gypsum board partition wall, although the middle into the sound-absorbing cotton but because of lack of quality, sound insulation is poor.
The door of the room is also the decoration design is more difficult problem, usually a noise door price of 4 to 5 thousand dollars, as many as ten thousand yuan. At present, more practical is the use of molding one door, the door side of the seal method, with the door closer sound insulation is also good (relative to the ordinary door).
In some places due to the weight of the problem, can not use brick or other wall approach, can only use light steel keel gypsum board approach is recommended to add a layer of gypsum board outside the hardness of a relatively high cement board, this Cement board appearance and gypsum board the same (size is also similar), but the hardness is much higher than the gypsum board, is a good sound insulation material, should pay attention to the construction process, especially the part of the gap must be sealed.
Economical and practical choice is 2/4 red brick walls, both sides of the cement wall. This partition wall must be piled to the top, you need to take the ventilation pipe or other traces and then through the hole, should pay attention to the pipeline sealing problem, otherwise the same can cause crosstalk phenomenon. Followed by noise wall panels, this material is a professional sound insulation material, both sides of the metal plate is the middle of the sound insulation foam plastic, the greater the thickness of the wall board the better the noise effect.

Share to: