What is the difference between gsl30-hdpe geogrid and 30*30kn/m?
Double mesh into regular square, unidirectional geogrid mesh grid according to the intensity by 1:7 1:8 stretching, rib bearing body as a force, as the node transfer force, both constitute a whole, the whole production process to enhance the grid plane torsional modulus, in addition. The characteristics of each node in grid with symmetrical geometric structure and molecular structure of symmetric (tensile strain field grid nodes photoelastic images show that the geogrid strain field of the whole plane is symmetrical), the effectiveness of this product consistency determines the grid load transfer; grid geometry is optimized with the rib, rib the rib section approximate 90 degrees, providing effective for bearing surface grid and filler, the ribs effectively embedded fillers, more effective load transfer;
(see description brochure) application of geogrid 2, geogrid can improve the bearing capacity of the foundation (generally can raise more than 40%), increase the diffusion angle, so that the grid filling load diffusion angle increased to 50 from an average of 38 degrees; uneven settlement control, delaying the sedimentation rate; at the same time the role of axial loading and achieve the same effect, can be reduced by 30% - 40% of the thickness of the reinforced embankment, geogrid, traffic volume as the thickness of the Lujikeduo bearing more than 3.5 times. As a reinforced material of reinforced retaining wall and steep slope, the unidirectional geogrid is not only safe and economical, but also because of its special mesh size, the surface of the reinforced structure is easy to be green. 3, grille appearance
The introduction of the grille, two-way geogrid 1, the application of the grid two-way geogrid is mainly used in embankment engineering, subgrade engineering, soft foundation treatment engineering or as reinforced retaining wall of the secondary reinforcement grid.
