Thickness. The thickness of the PVC floor is mainly determined by two aspects, that is, the thickness of the bottom layer and the thickness of the wear-resistant layer. Currently on the market more common material layer thickness: 2.0mm, 2.5mm, 3.0mm, 3.5mm, 5.0mm these five kinds, and the wear layer thickness is 0.1mm, 0.12mm, 0.2mm, 0.3mm, 0.35mm, 0.5mm, etc.. In principle, the thicker the floor, the longer the service life, of course, the higher the price. Many consumers in the purchase of plastic floor when there is a big mistake, just look at the price does not ask the thickness, so businesses tend to take the thinnest products sold to consumers. Consumers should look for a professional business PVC flooring to buy.
Raw material and production process. The multi-layer composite sheet is composed of a bottom layer, a printing layer and a wear-resistant layer, and the quality of the three kinds of raw materials directly determines the quality of the plastic floor. Bottom layer: at present, the domestic manufacturers can use the bottom material can be divided into two categories, namely, new materials and recycled materials. However, the use of recycled materials produced plastic floor, its quality is not as good as the use of new materials flooring. The bottom material stepped up elastic strong, the water is not easy to deform, and is not easy to shrink, use a long time does not appear warped edge; and the recycled material made of bottom material almost no flexibility, the water will appear obvious swelling caused by edge tilt, if winter temperatures drop too fast will have obvious shrinkage thus, the influence of ground appearance. As consumers in general do not have the ability to distinguish the quality of the material, so we recommend that consumers buy branded products, do not covet cheap use of cottage PVC floor.
Printing film: imported printing layer and the printing layer produced by the domestic production of the color and fidelity is very good, and the general production of small printing layer is prone to fade. Consumers in the purchase of the best looking for a high degree of integrity of the business to buy, so as not to fade the color of the plastic floor, the impact of beauty. Wear resistant layer: due to the different manufacturers, the quality of the wear-resistant layer is also a big difference, the poor quality of the wear-resistant layer in addition to easy cracking is also easy to shrink, resulting in the edge of the floor. Also recommend consumers to find a high degree of integrity of the business to buy PVC floor.
