Home > categories > Machinery & Equipment > Plastic Blowing Machinery > What is the influence of the vacuum degree of vacuum oil filter?
Question:

What is the influence of the vacuum degree of vacuum oil filter?

What is the influence of the vacuum degree of vacuum oil filter?

Answer:

Vacuum oil filter machine is based on oil and water there is a big difference in boiling point, boiling water in a high vacuum state is greatly reduced (because the oil can not be run at high temperature can only be a vacuum state so that a large number of water evaporation and oil can remain liquid, so the choice of the vacuum state to oil-water separation), without considering the altitude. The general temperature at 65 degrees, vacuum 0.06MPA, oil-water separation effect is the best.
In 2, when the bubble is much too high, oil separation chamber, the upper oil bubble pump is easy to be removed, thus oil reduced, and so on the pump itself has hurt.
Influence of vacuum degree of vacuum oil filter:1, if the high vacuum may occur after vacuum through the high boiling point, oil and water is close to that of a lot of oil with water to evaporate (which is why the vacuum tank has a condenser, it is mainly used for oil return and automatic drainage)

Share to: