Home > categories > Machinery & Equipment > Textile Raw Materials Processing Machinery > What is the leading maintenance of the rapier loom?
Question:

What is the leading maintenance of the rapier loom?

What is the leading maintenance of the rapier loom?

Answer:

Adjust the installation position of the wire rope guide wheel and the back tank, so that the first piece of the raised arm, the wire rope guide wheel and the back arm are on the same vertical line. Adjust the length of the wire rope and fine tune the hook hook nut, so that all the heald frame flush
Install the blade (0161), so that the back of the blade with the raised arm connected to the front and the blade connected to the nylon rope with a binding device.
Install the blade (0159) Turn the blade shaft (0132) and insert the blade (0159) in turn. After the blade is set, the front end of the blade should be hooked to the hook coupling, rotate the blade shaft so that the blade shaft is outward, and the front side of the shaft should be flush with the outer side of the small wall. Check whether the blade movement is flexible
Insert 20 retractor fittings (0100-9) in turn and check that the hooks are flexible
(0141), after the machine into the hammer into the arm fixed shaft (0141), followed by the back of the hatch arm clamp (0142), to mention the arm, the forefront of the clamp (0142) Arm clip, so that the arm and pull the hook alignment, tighten the tightening screws

Share to: