What is the main organizational structure of ordinary lathe
. Bed: the basic parts of the lathe, used to support and install the lathe parts, to ensure its relative position, such as bedside box, feed box, slide box and so on. The bed has sufficient rigidity and strength, and the bed surface is very high in accuracy to ensure that there is a correct relative position between the parts
There are four parallel rails on the bed, for the big carriage (turret) and tailstock relative to the headbox for the correct movement, in order to maintain the bed surface accuracy, in the operation of the lathe should pay attention to maintenance.
Transmission: by the motor drive gearbox gear shaft rotation, by changing the gear within the gear with (engagement) position, get different speed, and then through the pulley drive movement to the spindle.
Bedside box (spindle box): to support the spindle and make it rotate. The spindle is hollow. The front end of the outer surface of the installation of three-jaw chuck and other accessories to hold the workpiece, the front end of the cone used to install the top, slender hole can be inserted into the long bar. C6132 lathe spindle box only one speed, the spindle speed mechanism placed in a separate gearbox away from the spindle to reduce the
