Home > categories > Packaging & Printing > Strapping > What is the reason that the packing belt of the packer is not glued
Question:

What is the reason that the packing belt of the packer is not glued

What is the reason that the packing belt of the packer is not glued?

Answer:

Packaging materials with the belt has a bearing, you may have this batch of packaging materials, raw materials doped more ingredients, and now on the market with the main component of polypropylene, commonly known as PP. A better pack should have a PP content of more than 95%. Other ingredients are complex, such as mixing calcium carbonate, talc, wollastonite, glass fiber and other inorganic fillers. If the ingredients are more, the hot-melt viscosity is poor. It is recommended that you provide the supplier with the matching parameters.
May be the head position deviation of semi automatic strapping machine or belt joint some partial correction, it can be.
Could you change the original packing tape, packing tape thickness is relatively thick, and now the thin, semi automatic strapping machine head can not be fully in place. Solution: adjust the head position again
Packaged with adhesive effect is not good and there will be a lot of reasons, may be the head temperature is not enough, it may be of poor quality tape

Share to: