What is the way to open the horse lock?
Resistance method; buy a bottle of repair table with waterproof oil. Poured into the lock body. Do not leave the hook with a single hook. Then the lock spring will be very slow rebound. Because the waterproof oil is very sticky. The rebound force of the lock spring is blocked by a part.
Solid tooth method; first with a single hook by the lock spring. To feel the gap of the film position. Should be able to feel the approximate location. And then do not be on the other child, and then inserted into the lock body with a thin feeler. To insert the top of the lock. Note that the lock is not separated from the two sides, but not the state of the key. At this point the next lock spring. The lock spring does not bounce back as well. Note that the curvature of the feeler is consistent with the key. Bend big or small with open record. And the speed has a big relationship. Best to follow their own experiments to master. And then use a single hook point under the lock spring. To the same as beforehand. Followed by points. Do not say anything to gently shaking left and right. Single hook also a little bit in turn. Try it several times. You will be able to open
Set the law; with the first do not lock the other. Be careful not to top the spring. Hand to move around. Do not die. Fork into the tool about the depth of the type. Do not stop at the same time do not stop. Replace the tool in turn until the 5 tools are finished. If not open. Use two tools to overlap. Insert the lock body up and down around the depth. At the same time, two tools are gathered. In order to achieve the change of tooth position 5 tools in turn from the stack reverse, can achieve the maximum tooth changes. "Do not stop at all. To sway left and right until you open. My tool is made of repair gears. Because it is hard enough.
