What parts and tools are needed to install solar water heaters?
Bracket assembly of solar water heaterAfter unpacking inspection, the components of the support are arranged and placed in easy installation position.First, assemble the brackets on both sides. The support of each side of the anterior column and posterior column respectively and the water tank barrel support connection, and the angle is fixed on the bracket. Then fix the diagonal beam on both sides of the bracket separately.The two side brackets shall be erected, and the brackets on both sides shall be connected well with the rear column and the oblique pulling beam of the water heater.Fix the tailstock, the front frame and the horizontal beam. The stent assembly is complete.
Tools: board hand, impact drill, expansion screw, water pipe, raw material belt, insulated cotton, fixed pipe clamp, metal pipe, but also pipe insert, tapping wrench.
Installation steps:1, out of the box inspectionFirst of all, the water heater should be checked out of the box.Be sure to check whether the random attachments and data are complete.Check the surface of water tank for scratches and whether the spare parts of water tank are missing.Check whether the supports and accessories are missing.Check whether the vacuum tube is damaged or leak, and whether the spare parts are missing.Check the controller and supporting sensors, electric auxiliary heating head, solenoid valve and other accessories are complete, and first of all in the appearance to check whether there is quality problems.
Parts: upper and lower water pipe (aluminum pipe or PES, PPR), three, direct, mixing valve and nozzle, heat preservation, with tropical, electromagnetic valve, temperature sensor, power line and signal line, shielding wire, aluminum foil, electric heater etc.. Controller (buy solar band).
