Home > categories > Hydraulic & Pneumatic > Angle Valve > What's the reason for the small water flow in the toilet corner valve?
Question:

What's the reason for the small water flow in the toilet corner valve?

The two toilets in the house are out of water. The two toilet pipes are removed and the water output is very small. What's the matter? Is the pipe clogged?

Answer:

If fitted with angle valves, remove the cleaning. The toilet is equipped with a filter and needs cleaning.There are impurities in the water supply pipe of the new building. The valve or toilet filter is blocked.
May be blocked, blocking the reasons for two reasons, one is the angle valve intake, and some have a filter screen, a long time, may be impurities to filter screen blocked, the solution is to remove the angle valve cleaning screen. Another reason is that some toilet intakes also have filters, which may have blocked the toilet and removed the cleaning screen from the toilet.
Is your house an iron pipe? If it is, remove the angle valve and clean the rust inside.Angle valve itself is rarely blocked, you take the angle valve down, try the flow of large, on the press on the lineThe premise is when you're sure the toilet screen isn't blocked
Several reasons. A: the water pressure, your washbasin and kitchen faucet flow is not big? If it's not big, it's not enough water pressure.Two: see if the angle valve is all open. Or is there a blockage?.Three: the toilet at the back of the water inlet pipe, there is a water filter, you can take it down to see if it is blocked, just wash it. If it is blocked, the reason is: the new house pipe sand more. Or the old house, because sometimes without water.If there's no water left, the toilet must be out of water.
There are several reasonsFirst, the water pressure problem, the water pressure is not enough, will directly affect the water yield.Two, look at the angle valve is not all open. It's probably not fully open yet.Three, blocked, blocking the reasons for two reasons:1) one is the angle valve inlet, and some have a filter screen, a long time, may impurities filter screen blocked, the solution is to remove the angle valve cleaning screen.2) another reason is that some toilet intakes also have a strainer. This is probably the place where the toilet is clogged and the inlet pipe is removed from the toilet to clean the screen.

Share to: