Check your phone: Check whether the appearance of phone is damaged, power on, and check whether the phone is operating normally. Such as call, the phone volume buttons, play music, check the horn player ... and so if everything is normal. Registration Phone: before coating, register each phone model. 3 Cleaning Phone: before coating, you can use suction head to clean the dust in each gap, and clean the external phone with cleanser. drop the cleanser on the surface of phone, wipe the surface to clean, and clean the external parts Removing the back cover: the one that the rear cover can be removed, or must be removed, remove the SIM card, memory card, (Note: If the battery removed has serious eccentricity or too large gap, you can not remove the battery) Choose fixture: select the desired size in accordance to each phone's size,(check to ensure no gaps), the fixture can not be too tight so as not to crush the screen (note that the phone screen should be up), please notice all the keys on your phone, holes need to be avoided, can not be covered, avoid impacting the effect of coating, coating can be processed after finishing checking. launching switch: Press the start switch, lights up(as the figures in picture..), wait 3 seconds and machine starts to work, press OFF means to stop working, wait 3 seconds the machine starts to work, time of plating a mobile phone is about 3-4 minutes, the machine stops automatically after finishing coating, wait about 5 seconds air pressure drops, then open the sealed windows.
the stick membrane methods of waterproof mobile phone: packaging equipment of mobile phone stick membrane: 1, damp cloth, fiber cloth, dedusting paster, phone protective film, scratch cards and changing the stick membrane labels, steps of phone's stick membrane, to clean the screen: 2, wipe the screen with damp cloth, rub back and forth for multiple times, try best to wipe the phone to clean, damp cloth will clean grease and fingerprints of the screen 3, wipe the screen with locomotive fiber cloth, do not worry about dust or wool stuck on the screen, following links can be handled 4, using locomotive dedusting paster to clean stubborn dirt, dust or wool can be affixed to cleanly, steps of mobile phone stick membrane, second step, screen stick membrane: put the phone protective film out of the packaging, directly place the phone protector on the screen and feel the bonding situation of stick membrane and screen, the position of stick membrane, 5, there are two labels on phone protective film, firstly, tear 1 label and stick the phone packaging film to the phone screen, 6, notice to align the hole and the edges of phone screen, and the hand should not be sticked to the phone screen. 7, after stick the packaging film to the screen, tear 2 label, 8, if there exists bubble, you can use locomotive scratch cards to scratch the bubble on the screen, eliminating the bubbles, 9,( if there are bubbles can't be scratched out, you can stick the stick membrane with cleaning paste, then scratch the bubbles with scratch cards) 10, wipe the screen with cloth, the whole stick membrane process will be finished.
Phone coaters, waterproof mobile phone stick membrane method, how to clean the phone: before coating, you can use suction head to clean the dust in each gap, and clean the external phone with cleanser. drop the cleanser on the surface of phone, wipe the surface to clean, and clean the external parts Choose fixtures: select the desired size in accordance to each phone's size,(check to ensure no gaps), the fixture can not be too tight so as not to crush the screen (note that the phone screen should be up), please notice all the keys on your phone, holes need to be avoided, can not be covered, avoid impacting the effect of coating, coating can be processed after finishing checking. launching switch: Press the start switch, lights up, wait 3 seconds and machine starts to work, press OFF means to stop working, wait 3 seconds the machine starts to work, time of plating a mobile phone is about 3-4 minutes, the machine stops automatically after finishing coating, wait about 5 seconds air pressure drops, then open the sealed windows.
