Home > categories > Construction & Real Estate > Waterproofing Membrane > What should the attention of the membrane waterproof construction?
Question:

What should the attention of the membrane waterproof construction?

What should the attention of the membrane waterproof construction?

Answer:

(3) Paving method: peel the coiled surface of the release paper, the membrane attached to the base surface, the long side of the membrane waterproof material to keep 50mm, short side lap to keep 70mm, the coil required to maintain a natural relaxation , Do not pull too tight, the web should be done, should immediately use a flat vibrator full compaction, the vertical parts of the rubber hammer with real;
(4) Coil Lap Adhesive: After the web is compacted, the lap is opened and the lacquer is applied with the paint brush to apply the two adhesive surfaces of the coil joint. After a moment of dry feel when the sticky, you can glue, and then press the rubber hammer knocked dense, so as not to cause leakage of slit; (5) waterproof layer construction temperature selection above 5 ℃ is appropriate.
(1) grass-roots coating on the base layer of treatment agent, requiring thin and uniform, generally dry, when the sticky hand can be paving the membrane;
(2) the construction of the membrane waterproof layer should generally be the lowest elevation from the level of parallel roof ridge construction, so that the coil according to the direction of flow lap, when the roof slope greater than 10%, the coil should be perpendicular to the direction of the roof paving;

Share to: