Home > categories > Security & Protection > Fire Hose > What will cause my 3 ton Central AC to frost over at the txv lines and bottom coils.?
Question:

What will cause my 3 ton Central AC to frost over at the txv lines and bottom coils.?

We have had the system for 8 years and never had any trouble. The coils have been cleaned to where they look new and the Filter is changed every month and currently has a new one on it. The air that is coming out seems cold and it reads around 62 degrees. After a week of it and the system seeming to be overworked the air temp is the same so I'm not sure if it needs Freon. Help please.

Answer:

do you know where to find the fire extinguisher? Christ. Eternal hell is not scriptural only the wicked will burn until they are gone and no more material to burn and only because they outright refuse to be saved. Killing others only makes you remembered as a murderer until your family die with broken hearts. Christ still holds the fire extinguisher and hes fair !
what is it exactly a jaw crusher?! sorry for answering by a question.
The highest point is when the water has no vertical velocity. After this it will start to fall back to the ground so this will be the highest possible fire that can be reached. The velocity must be divided into horizontal and vertical components. The vertical will be used to determine the time it takes to reach max height and then this time used with the horizontal component to determine distance from the building. Vv vertical velocity V*sin(Angle) 24.6*sin(39.6) 15.68 m/s Vh horizontal velocity V*cos(39.6) 24.6*cos(39.6) 18.95 m/s Time to reach max height can be found when the acceleration from gravity cancels out the initial upward velocity of the water. v g*t and t v/g t 15.68/9.81 1.6 seconds Distance is then the time just found times the horizontal velocity. Distance 1.5*18.95 30.3 meters The fire hose should be located 30.3 meters from the building to reach the highest possible fire. Note. That other answer has: Vtop-9.8t+15.68t0, t0.625 For one thing he has an extra t in there (it should just be 15.68). This would give 9.8*t 15.68*t and t 1.6 as I calculated above. He somehow came up with 1/1.6 0.625.

Share to: