Why are packing machines always unstable?
The temperature adjustment knob is improperly adjusted.In the packing machine electric control box, the control box cover is opened above the circuit board, the adjusting knob can be clearly seen, the temperature is increased in the clockwise direction, and on the contrary, the utility model is reduced. The temperature is too high or too low, the bonding effect is not good, so don't transfer too much at one time, the general tune in the scale between 4 - 5 can be.
The electric heating spring is out of order.Fatigue of long tension spring on electric heating hand. This can not be sent to head down two pack between cause adhesion half or less.
The voltage of the supply is abnormal.This machine should use 220V voltage. Many factories voltage is often inadequate, if the use of long cable will cause a voltage drop so that the soup temperature becomes lower, even in fastened when burned motor.
The head position adjustment improper packing machine.The head is too high or too low, left and right, straps or tool to collide with heating up the two layers, should be adjusted according to the situation.
