The wires were placed in the foam box for a while and the wires went inside the foam. The wires were in good condition and the foam panels were melted. Question added: several are asked by the non-asked. I said that the wire put the box, and no power work. More
You do not specifically say anything, rock wool sandwich panels, steel sandwich panels, or other. Such as the arc of the post to drink the United States and Taiwan is to pay attention to the high content of the glue is not used in hot places usually less use, must be used only shaped ceiling, because it can bend, other places do not use.
qualified: sub-check the score table without 0 points, the summary table score of 70 points and above, 80 points; : 1) when the summary table score less than 70 minutes; 2) when there is a sub-check the score table is 0 points Second, the sub-name and score the safety burden of Gan Gan 丨 imitation wet groin splash management 10 points civilized construction 15 points scaffolding 10 points foundation pit 10 min template works 10 points Work 10 points construction electricity 10 points material hoist and construction lift 10 points tower crane and lifting hoisting 10 minutes construction equipment 5 points
Sandwich panels do not refer to the blockboard, because the sandwich panels are many kinds, including three PCT board, five PCT board, nine PCT board ... ... can only say that the blockboard is sandwich board often Of a kind. Not directly in the blockboard on the paint, usually on the outside to paste decorative panels, and then clear oil process, if you want to paint directly on the plate, please use medium density board, used for making furniture, oil mixing process! Maintenance is good, life is not a problem! But can buy as much as possible to buy, do not live production. After all, the scene can not reach the factory clean paint, and did not sell the beautiful. The general plate is not very expensive, but do not underestimate the paint! Will the board be put on the floor after painting and painting? The answer is yes, the plate had to nail a layer of gypsum board, and then putty putty paint, so that will not be delaminated.
