I been having chargeing problems, and I found a tan with black stripe wire in wire harness by the alternator and I cant fig out where it goes. it has a factory conn. on it with a 3/8 diam. hole in it
The firing order should be 1-3-4-2 (on cap) The cylinder order; from front to back 1-2-3-4 Most distributor caps will be marked with the proper numbers if yours is not you may want to get a more expensive cap
okorder ually marked on the sheathing of the wire in gauge size or ohm rating. The fusible link could also be a fuse in some newer models and you can install an inline weatherproof fuseholder rather than fusible wire....just make sure the fuse is the appropriate one for the size wiring of the circuit.
