Home > categories > Service Equipment > Roll up Display > Yilabao how to design it
Question:

Yilabao how to design it

Yilabao how to design it

Answer:

There is a drum roll general at the bottom, in the spring, when not in the advertising picture in the winding drum. When you need to use it, pull out the cloth and support it with a stick at the back. When need to use Yilabao, can according to the following steps:A. "roll up" foot rotation to 90 degrees downwards.The B. will "roll up" scroll tab on the sticky paper off, put the picture into paste, justified on the straight, flat up to.The C. will open the plastic cover at one end of the drawing strip and pull out the middle hard plastic core. (use a two cm wide double sided adhesive to attach the hard plastic core to the top edge of the picture), then fold it back into the metal tube and cover the plastic cover.D. on the bottom end, hand pulled paintings, pulls out the "roll up" at the end face of ring bolt, the picture slowly into the "roll up" (Note: must first pull the paintings and pictures, and then pull the pin).When using E., seventy percent off metal rods will be placed in the "roll out" connection, the metal rod is inserted in the hole "roll up" triangular plastic, put the picture slowly drawn, hung the painting of the hook, the hook at the top end of the connecting rod can be metal.
The design process of ilabo:First open the materials needed to do and then search Yilabao or poster design.Download posters, designs and other pictures as needed.Then use the software tool to open, modify and organize the desired picture.
If you need to change the picture, pull out the picture and insert the bolt into the fixed hole to fix the picture. Repeat the procedure from A to D. 80cmx200cm Yilabao screen size: 79x200cm (Note: the top 1cm screen size white edge, the bottom left 2cm).
Use ilabo:Remove the A. Yilabao which the main supporting rod out;The B. two supports Yilabao at the bottom of the open, the upright on the ground;C. install the main rod and the bottom bracket;D. pull up the screen to connect it to the main rod;E. adjust the installation screen to make it smooth and beautiful

Share to:

Hot Tag