Home > categories > Security & Protection > CCTV Camera > Yourself at home with a computer monitor how to install. Need to set up those. And installation steps
Question:

Yourself at home with a computer monitor how to install. Need to set up those. And installation steps

Yourself at home with a computer monitor how to install. Need to set up those. And installation steps

Answer:

4. Install the camera cover, if you need to install the shield, in the second step, directly from here to install the shield. 3, the power adapter into the shroud; 4, reset the upper cover and rear baffle, straighten the cable (2), remove the cover plate and rear baffle; 2, out of the fixed metal sheet, the camera fixed; , Fixed, loaded on the bracket.
5. Install the camera BNC head or the aerial head, insert the welded video cable BNC plug into the socket of the video cable, and confirm that it is secure. Monitor the camera and its supporting devices, such as the lens, protective cover, bracket, wipers, etc., should be installed firmly, should be flexible operation, should pay attention to anti-damage, and coordination with the surrounding environment.
3. Fixed monitoring camera, out of the bracket, the plug, screw, screwdriver, hammer, electric drill and other tools, in accordance with the pre-determined location, installed bracket. Check the camera, the camera in accordance with the agreed direction installed;
2. Monitor the camera to install the work, in accordance with the camera lens model and specifications, carefully fitted with the lens (infrared camera does not need to install the lens), be careful not to touch the lens CCD (marked part of the figure), confirm the fixed firmly , Turn on the power, connect the host or on-site use of monitors, small TV and so adjust the aperture focal length.
1. Select the location to install the camera, the need to choose according to the needs of the scene and the situation, others can not help, come up with surveillance camera stand, ready tools and parts: up plug, screw, screwdriver, hammer, Tools; according to the pre-determined installation location, check the size of the plug and self-tapping screws, try the bracket screw and the camera base of the screw is appropriate, embedded pipeline interface is handled properly, test cable is smooth, ready After entering the installer. To meet the requirements of the target field to monitor the target conditions, the installation height: indoor ground should not be less than 2.5m; outdoor from the ground should not be less than 3.5m.

Share to: