Home > categories > Minerals & Metallurgy > Aluminum Foils > 1992 pontiac bonneville the pipe from water pump to motor?
Question:

1992 pontiac bonneville the pipe from water pump to motor?

is leakingmt brother says it is loose but cant be replaced without replacing the whole thing is this true?

Answer:

A good sized hardware store should have what you need in aluminum or copper with an inner diameter close to 4.6 mm ( the fractional equivalent 3/16 or decimal .187)
NOW DAYS WITHOUT PIPE YOU CAN NOT BUILD A GOOD HOME TO LIVE, EVERYDAY LIFE YOU NEED PIPE TO PASS YOUR WORKING DAY WITHOUT A HITCHYOU NEED EXTENSIBLE PIPE FOR YOUR BEST QUALITYYOU CAN FIND YOUR BEST ONE.
tricky subjecttry searching over the search enginesthat will might help!
yes the whole thing, i dont know for what retarded reason but the engineers decided that a black painted steel tube was the way to go on these, it is a very common issue on these because well any rocket scientist should know that steel plus water plus oxygen equals iron oxide in which is known as rust, and well the rust goes through the tubing and is toasted eventually really you could just get some aluminum tubing from a hardware or some other supplies store of some kind of the same size as the steel tubing and use hose clamps and just repair the sections that are rusted out this is what we do, its easy to cut the tubing, both the steel and the aluminum the cooling system is only 16PSI hose clamps are what to use to repair this tubing, , but on these tubes the engineers went with a compressed one-piece design where the rubber is permanently attached to the steel tubing for whatever reason being unknown, other than to most lilkely save manufacturing costs, in which all manufacturers of products do, especially in todays world good luck

Share to: