Home > categories > Machinery & Equipment > Stepper Motor > 57BYG250-76 stepper motor to match the power supply, 100W enough?
Question:

57BYG250-76 stepper motor to match the power supply, 100W enough?

57BYG250-76 stepper motor to match the power supply, 100W enough?

Answer:

Stop position depends only on the pulse frequency and pulse number, regardless of load changes, when the stepper driver receives a pulse signal, it drives stepper motor to set the direction of rotation of a fixed angle called the step angle, it is the rotation of the fixed point of the operation step by step. We can control the angular displacement by controlling the number of pulses, so as to achieve the purpose of accurate positioning. At the same time, we can control the speed and acceleration of motor rotation by controlling the pulse frequency, so as to achieve the purpose of speed regulation.
It depends on how high the voltage you put on the drive. Generally, 57 Motors should be rated at around 3 amps, and if your drive uses 12 volts, the voltage should be enough. Stepper motor has a characteristic, high voltage drive, high speed performance is better than low voltage. Mainly depends on the motor rated current and drive voltage, and finally consider the load characteristics, select the right power supply.
2 57BYG250-76 stepper motor to match the power supply, 100W enough.The stepping motor is an open loop control element which transforms the electric pulse signal into angular displacement or linear displacement. In the case of non overloading, the motor speed,
Stepper motor is an induction motor, its working principle is the use of electronic circuit, the DC power supply variable components, multi-phase timing control current this current stepper motor power supply, stepper motor can work normally, the power supply for the stepper motor driver is divided into the multi phase sequence controller.

Share to: