6061 aluminum rod representative use
Five, printing aluminum mainly used for making PS version, aluminum based PS version of the printing industry is a new type of material used in automatic plate making and printing. Aluminum Alloy basic status code: F free state for processing in the molding process, work hardening and heat treatment conditions for the special requirements of the product, the mechanical properties of the products are not specified (not common) O which is suitable for processing products in the annealed state completely annealing was the lowest strength (occasional) H hardening the State applies to improve the strength of the product through the hardening product in hardening after after (or not after) additional heat treatment. The strength decreased (the general non material heat treatment) W solid solution heat treatment state of an unstable state, only suitable for the solid solution after heat treatment. During natural aging at room temperature, the state code said only products in the natural aging stage (not common) T heat treatment (F, O, H in different states) for heat After work, the product is stabilized by (or without) working hardening. T code must be followed by one or more Arabia digital (usually heat treatment reinforced material), our common non heat treatment reinforced aluminum alloy behind the status code is usually the letter H plus two digits. Such as 1100 H14. The following brief describes the meaning of the following status code content. The letter H is followed by two digits: the first number indicates the method of work hardening.
