1.5 air-conditioning power cord to use more cross-section of the wire?
Look at the following steps . you can try to clean the data cable plug, such as with rubber, dry cloth, then the iPhone's power outlet is also clean, re-insert. 2. Shut down the phone I often encounter this situation 3. The above two methods may not be able to solve the problem, if you need to solve the fundamental problem, it needs to replace the data line. If you are using the Apple iPhone6 phone, it is recommended to bring the original data cable to Apple after the sale that the situation, check to see if you can replace the data cable free of charge. I recommend buying a brand of charging lines, almost 40 to 120 between the price.
This problem is mostly due to the fact that the data lines are not original. However, sometimes obviously with the original data cable, but it will appear this situation. The reason is as follows: "This cable or accessories are not certified, can not work" reasons: One reason: the data line interface IC is not working properly, the data cable is damaged, need to replace the data line. Cause two: data line interface IC work properly, but the IC and the phone of a pair of code can not work properly, may be the interface of the cheat for a long time use, there are dirty, clean up and try again! Cause three: data line interface Gold and the circuit board welding Weld problem, the data line is damaged, need to replace the data line. Cause four: the use of high imitation lines, the general upgrade of the new system may lead to such a prompt, please replace the original original data cable. There is a "do not support this accessory" error reasons: one reason: just access the data line on the prompt, this problem is generally poor contact, the solution: to see if the data line gold finger dirty, and then view the phone jack Whether there is dirt, washed with cotton alcohol. Cause two: If you use the computer to charge, insert the front USB interface, this prompt is generally caused by insufficient power supply, please insert the back of the chassis, or charge charger. Cause three: the charger is not original, the voltage is insufficient, try to replace the charger.
We can first try to clean the data cable plug, such as with rubber, then the iPhone's power jack is also clean about. 2. If the above method tried, or not, then the temporary solution is to first shut down, and then charge the iPhone. 3. Then we charge the iPhone, because when the system is closed, it can not detect, can not stop us from charging 4. If you are using a computer to charge, then, after the shutdown try to see if the normal charge. 5. Of course, the above method is only temporary to solve the problem can not be charged, if you want to solve the fundamental problem, you need to replace the data line. If you are using the Apple iPhone5s phone, it is recommended to bring the original data cable to Apple after the sale that the situation, check to see if you can replace the data cable free of charge. 6. If you are not using the original data cable, or Apple is not replaced after the sale, then only their own paid to buy. 7. Why is there such a problem, one is because the iOS7 system has a test data line is the original function, the second is due to the data line interface dirty, or their own some quality problems, or line damage.
