A large area of the site to save effort there is no ceiling drilling special drilling machine is fixed on the hammer stand will be able to operate on the ground?
Electric hammer switch pressure tape tied, making it in the energized state. Then find a thicker wooden electric hammer tie, wooden floor height of 1 meters length is reduced, in a tie with switch socket in wooden hammer, socket switch. So people can use up efforts to punch, saving more than on
Your idea is very good, in fact it has been doing so, but is the copycat version, is tied to one hammer drilling station on the ground with a piece of wood.
Here to give you a sketch picture, one of the four joint position, is fixedly connected with a 8 mm hanger screw drill, the use of wood 3.5 x 5 cm above the wooden hammer; lashing on the left above the batten, hammer position fixed by another section of wood, set a good eye depth of play under pressure, above right sideways length of wood, identify the drilling position, connect the power to.
The top mounted in the ceiling hanger before playing the holes, making use of the lever principle. Not on the floor, a hammer on the floor or down to normal.
