What is the distance between the power cable and the thermal pipe when it is laid above the thermal pipe?
Cable and 10kV power line parallel laying the minimum distance of 0.5 meters.
Cabinets Half Week + Line (Horizontal + Vertical) + End Range Cabinets Half Week Long or Longer to Equipment Reserve + Quota Total Length * 2.5%
How do you not say that the three-phase system or two-phase system, if the two systems is the power in addition to the voltage is equal to the current, three-phase power per kilowatt multiplied by 2 equal to the current, such as 220V, 3000W / 220V = 13.6A, 380V, 3KW * 2 = 6A. Wire 10 square below, each square can be with 5A, which is the calculation of aluminum core line, copper wire line operator count, 220V aluminum core must be greater than 2.5 square, copper core must be greater than 1.5 square, 380V with aluminum core The line must be greater than 1.5 square and the copper wire must be greater than 1 square. At this time should also consider the equipment to start the current and increase the appropriate diameter.
