A variety of totem cabinet line shape, you know?
This friend Hello! See you mention the problem, you should not understand the heat pump, the current air source heat pump there are several, there are one, and split, one of the installation is relatively simple, only need to connect the pipeline and power, The installation of the general needs of professionals to complete. The question you asked was too general.
First manufacturers have to install instructions to you, no words you'd better please install the professional installation for you. Here is a brief introduction: indoor unit and insulation tank is generally installed in the open air, if the heat pump water heater is a machine without copper connection, the circulating pump suction port connected to the insulation tank, outlet connected to the heat pump water heater below the entrance, the outlet connected to the insulation The tank forms a circular heating. Note that the water level of the tank is higher than the circulating water pump, easy pumping will not make the heat pump water heater pressure is too high to protect the compressor. Note: the water tank and the host without parallel can be, as long as no more than 2.5 meters deviation can be. Household machines do not need, as long as the water pipe connected to the host and the water tank just fine. Circulation Engineering Machine Installation: The cycle heating project consists of heat pump unit, hot water circulation pump, heat storage tank, circulation control system and solenoid valve, water valve connection water pump and so on to form a complete system. In line with the unit's water quality requirements of the cold water directly into the tank, through the circulating pump to the water tank in the cold water pump into the heat pump unit cycle heating to a higher water temperature, the control system automatically control the water and heating temperature until meet user requirements. I was Bo Lang's sale, do not understand can continue to ask me Oh
