According to the performance and use of different architectural glass can be divided into two categories
Third, the glass construction and use of the Notes
1, in the transport process, we must pay attention to fixed and soft pad. General recommended the use of erected method of transport. Vehicles driving should also pay attention to maintain stability and slow.
2, the other side of the glass installation is closed, it is necessary to pay attention to clean the surface before installation.It is best to use a dedicated glass cleaner, and to be dry after confirming that there is no stains before installation, the best use of clean Building gloves.
3, the installation of glass, to use silicone sealant for fixed, in the windows and other installation, but also with the rubber seal with the use.
4, after the completion of construction, we should pay attention to sticking anti-collision warning signs, generally can not use stickers, color electrical tape, etc. to be prompted.
Classification of glass
The use of glass in the decoration is very common, from the external walls to the indoor screen, doors, etc. will be used in this section, we will discuss this content.
Glass is simply classified into flat glass and special glass. Flat glass is divided into three kinds: that is, on the method of flat glass (sub-slot / no groove), flat pull method of glass and float glass. Glass due to the uniform thickness of the upper and lower surface parallel to the parallel, coupled with high labor productivity and management and other factors, float glass is becoming the mainstream of glass manufacturing, while the variety of special glass, the following decoration in the common varieties One by one description: First, ordinary flat glass.
1, 3 - 4 PCT glass, mm in the daily also known as PCT. We said 3 PCT glass, refers to the thickness of 3mm glass. This type of glass is mainly used for frame surface.
2, 5 - 6 PCT glass, mainly used for external walls, doors and other small areas of light through modeling and so on
3, 7 - 9 PCT glass, mainly used for indoor screen and other large area but there are framework to protect the shape.
4, 9 - 10 PCT glass, can be used for indoor large partition, bar and other renovation projects.
5, 11 - 12 PCT glass, can be used to spring glass doors and some of the activities of the flow of large partitions.
6, 15% above the glass, the general market sales less often need to order, mainly for large area of ??the glass wall to the wall of the whole glass wall.
