Advantages of pneumatic components？The pneumatic device has simple structure, handiness and simple installation and maintenance
5, the use of compressed air, storage energy, to achieve centralized gas supply. It can release energy in short time to obtain high speed response in intermittent motion. Buffer can be realized. Strong adaptability to impact load and over load. Under certain conditions, the pneumatic device has the ability of self preservation.6 、 all pneumatic control, with fire prevention, explosion proof, moisture-proof ability. Compared with hydraulic method, pneumatic mode can be used in high temperature situation.7. compressed air can be centralized supply, long-distance transmission.
Pneumatic valve automatic temperature control technology is used in mixing with water cooling device, to determine the mixed water temperature by a temperature sensing element of self operated temperature control valve, and according to the variation of water temperature control switch installed in the valve passage inlet temperature, thereby changing the heat into the water. The pneumatic valve can indirectly control the water inlet by controlling the backwater quantity. The structure is simple, and the cost is low. At run time if the outage situation, temperature control part can still play a very good protective effect. At the same time, the pneumatic valve with electric actuator water cooling device, to determine the indoor temperature by a temperature sensing element of electric heating type remote temperature control valve, and according to the regulation of water temperature changes in high temperature water inlet valve installed in the channel. The advantages of the mixed water cooling device mainly includes temperature controller can be used to control the temperature, temperature range adjustable; temperature controller can be set for the opening and closing time, easy to control, can increase the other kinds of intelligent control functions; electric drive safety, electric three-way valve is not easy to be blocked, has a good ability to adapt to the water quality.
1 、 pneumatic device simple structure, light, simple installation and maintenance. Medium for the air, compared to the hydraulic medium is not easy to burn, so the use of safety.2, the working medium is inexhaustible air, the air itself does not cost money. The utility model has the advantages of simple air handling, no environmental pollution and low cost.3, the output force and work speed adjustment is very easy. The speed of the cylinder is generally less than 1M/S, faster than the hydraulic and electrical methods of action.4 、 high reliability and long service life. Electrical components of the effective action of about a million times, while the general electromagnetic valve life of more than 30 million times, and some good quality valve more than 200 million times.
