The diameter is 4mm,The material to be machined is aluminum, which is the maximum amount of feed expectedCNC milling machineI've hit the speed to 3000 rpm and the feed rate is 600Is there anything faster than this?
This is based on the actual exercise experience, you can try your own. To the milling machine to the material all have the request
The milling cutter is not provided with several edgesBrand? With or without coating? Processing methods? Such as milling groove, side milling?For example, milling, processing Aluminum Alloy (Si = 16%) cutting width 1.0xDThe cutting depth is 0.3xD, and the milling cutter is 4 2 bladesIt is recommended to select the cutting speed 120m/min single tooth feed 0.03The conversion speed is 9554, and the feed rate is F500This parameter is the coating parameter of aluminum alloy professional milling cutter, and the parameters should be chosen according to the parameters of your milling cutter.Side milling aluminum alloy recommended with two edge milling cutter. Two edge milling cutter good chip removal! Slot milling, processing Aluminum Alloy (Si = 16%) cutting width 0.2xDThe cutting depth is 0.8xD, and the milling cutter is 4mmIt is recommended to select the cutting speed 200m/min single tooth feed 0.05The conversion speed is 16000, and the feed rate is F1600.This parameter requires higher speed and higher precision of machine tools. Belongs to high speed machine. Select the parameters according to the tool materials, processing materials, processing methods to choose.
