Aluminum alloy doors and windows need to pay attention to what the problem, how to solve?
Aluminum doors and windows are custom products, set the time to pay attention to the size of the material must be reduced in order to better install to the door, window hole. There are also installed aluminum doors and windows to pay attention to the level and vertical. Installation of the door also need to understand the floor under the floor height, set a good height of the floor. Bathroom door outsourcing edge and the installation of the inner edge of the tile tile thickness.
In recent years, more and more home decoration in the use of coated glass, embossed glass, frosted glass as a special decoration materials, but sometimes there will be no construction in the direction of the installation, affecting the light reflection and decorative effect.
Control measures: 1. Attention to the installation of glass, the installation of embossed glass and frosted glass, the embossed glass pattern should be to the outdoor, frosted glass frosted surface should be to the room. 2. Coated glass should be installed in the outermost layer, single-sided coated glass coating layer should be toward the room. 3. Cutting glass, the edge of the gap shall not appear and oblique, cutting embossed glass and stained glass, the pattern should be consistent, seams should be consistent.
Aluminum doors and windows frame with the wall connection crack; push or open doors and windows, the frame fan jitter; by the wind or hand push and pull, the window frame deformation, shaking, giving a sense of insecurity.
Prevention and control measures: 1. Aluminum doors and windows should be the size of doors and windows openings, installation height, select the appropriate profile. 2. Door and window frame installation, the connection should be used with the wall for a reliable connection. Connection should be used not less than 1.5mm thickness of the thin steel plate, and anti-corrosion treatment. Connection method generally use expansion bolts, needle embedded in the wall. 3. Aluminum alloy doors and windows installed, you can force the door and window frame for inspection, such as the discovery of shaking or deformation, should be reinforced.
Daily use of aluminum doors and windows sometimes found around the wall connection with the Department of leakage, especially under the window angle is more common; followed by the combination of the windows of the splicing Department of water seepage.
Corresponding measures: 1. Because of the thermal expansion coefficient of the aluminum alloy and the wall material, under the influence of temperature, the frame body is easy to produce capillary cracks with the wall connection. In order to prevent the seepage at the cracks, aluminum doors and windows with the wall should be done in a flexible connection, the construction should be clear at the junction of the floor of the floating ash, mortar particles and other debris, and then inside and outside the box with the wall connection Sealant for sealing, glue to be continuous, do not miss, stick to be strong. 2. To the exposed connection screws, but also with a sealant buried seal, to prevent water seepage.
