Aluminum clad wooden doors and windows of the quality of how good or bad identification
Hollow glass selection, the cabinet to be the surface of the surface Guanghua built-in desiccant, the joints at the smooth; sealant to be full of no bubbles to make the double or three layers of glass between the good seal to prevent condensation water leakage insulation, Glass minimum standard requirements Float glass, smooth and smooth surface without blemish stains and granules, but can not have water, the original thickness of glass for more than 5mm.
General aluminum package wooden doors and windows of the wood should use the choice of finished materials, Glulam refers to the length of the length of 40cm-80cm, the thickness must be more than 15mm in order to ensure the strength of wood, requiring no section and smaller color and teeth Then, refers to the junction of the gap shall not exceed 0.1mm. Aluminum package wood window wood need to choose three layers of splicing wood into the wood, the special needs can be used when the four fight, such as the use of coniferous wood, wood to be cut into the original plate and then finger, and finally need to correspond Spliced into a square can be a good offset between the mutual stress of wood, to achieve the same effect
Sealed type of tape to have good flexibility and toughness and anti-aging properties, should be selected high content of EPDM high-quality sealing tape.
Operation must be strong metal structure, must be closed and flexible and to be lap is strictly prohibited, with good air tightness and hydrophobic performance, hardware installation to be strong can not appear hand shake phenomenon, you can easily achieve the effect of opening and closing.
A good aluminum package wooden doors and windows to have a smooth line, the formation of the perfect finish and the smaller wood color so that the overall artistic sense of the window at a glance!
