Aluminum cords hanging ceiling, you can turn it?
Can, the board, you can process into a circular arc, the corners are generally L-type, you can corner out of the place with scissors cut, bent into a round, but this may cause a saw porcelain shape need mold Glue, if it is white or solid color, you can draw two curved arc, arc angle is equal to the need to do circular curvature of the anastomosis, arc size is equal to the width of the corner,
Aluminum buckle board is a special material, the texture is light and durable, is widely used in home furnishings, with a variety of excellent features for the kitchen and bathroom, both to achieve a good decorative effect, but also with a variety of effects, So popular with consumers.
There is no problem, the integrated ceiling can do any!
es, the board Needless to say, processed into a circular arc Under the words, the corners are generally L-type, you can cut the corner of the place with scissors cut, bent into the garden, but this may cause a saw porcelain The shape of the need for plastic, if it is white or solid, you can draw two arcs arc, arc angle is equal to you need to do circular curvature of the anastomosis, arc size is equal to the width of the corner, you can try
Note the problem
5.1 ceiling uneven: the main keel installation when the boom leveling is not serious, resulting in the elevation of the ceiling is inconsistent; construction should be careful operation, check the hanging point of the degree of tightness, and pass the line check the height and flatness is consistent Design requirements and specification standards.
5.2 Light steel skeleton local node structure is unreasonable: ceiling light steel skeleton in the hole, lamp mouth, vents, etc., should be based on the corresponding node on the drawings configuration keel and connectors, so that the structure in line with the requirements of the drawings to ensure hanging The stiffness.
5.3 light steel skeleton hanging is not strong: the ceiling of the light steel skeleton should be hanging in the main structure, and should tighten the boom nut to control the fixed design elevation; roof within the pipeline, equipment parts shall not be hanging on the light steel skeleton.
5.4 cover panel block gap is not straight: cover panel specifications are deviated, the installation is not correct; construction attention to plate specifications, pull the line to find, when installed to ensure the formation of fixed straight.
5.5 pressure section, the pressure side is not tight not straight: the processing material specifications are inconsistent; use should be selected, the operation of the cable line after the fixed, pressure sticky.
5.6 box aluminum alloy ceiling to pay attention to the plate color, to prevent the uneven quality of the ills.
