Aluminum doors and windows how the glass
1. Glass cut less than the actual 2 to 5 mm. Easy to install
2. Have a Phillips screwdriver
3 conditions to drill a drill
A few centimeters long self-tapping screws
A. To the fixed place to install the glass, buy the glass side of the length of 2 times the pressure groove, according to the length of the glass and cut into the same two, first installed outside, in the installation of glass, and then installed inside, so easy to operate. Put the pressure groove punch, self-tapping screws fixed
B, to the door and window fan up, buy the glass circumference of the strip, the glass around, from the top of the loading, and then the top side of the edge of the mouth to the top of the hole on the screw and the side fixed. The purpose of the installation is the role of gravity
Aluminum alloy doors and windows are generally used in hollow steel, can be 5 + 6A +5,5 +9 A +5 5 +12 A +5 6 +9 A +6 6 +12 A +6, etc., can also be a single layer of tempered glass such as 6mm, 8mm, 10mm, etc., can also be tempered glass. The most is the first wave. See what you want to achieve the effect of the!
