Aluminum wood composite doors and windows of the maintenance of complex?
Aluminum doors and windows in use, the action should be light, push and pull its natural; found problems do not hard pull hard push, should first rule out the fault. So easy to wear doors and windows or their own accident. Vacuum cleaner can be used to suck the tank and the door closed the fouling. Every six months can use the lubricating oil on the hardware rolling, sliding and locking parts and other parts of the lubricating oil into the oil after repeated opening and closing 3 to 5 times to ensure that lubrication is complete, can increase the flexibility of the design and service life. Every three months should be combined with the windows of the groove and the sliding parts of the slide to prevent the dust, sand and other hardware on the normal use of good fortune, can use soft hair or vacuum cleaner to clean up. Every three months should be broken bridge aluminum doors and windows, aluminum frame doors and windows frame angle parts of the hardware to check, tighten the bolt in time to replace the damaged parts.
For glass, frame, fan and other broken aluminum doors and windows, aluminum bags of doors and windows for cleaning, the use of soft cloth stained with water or neutral detergent, do not use ordinary soap and detergent, can not use decontamination powder Toilet and other strong acid and alkali cleaning agent, which will erode the profile surface, so as to ensure that glass, frame and other parts are not scratched. Fouling, deformation is the main reason for the aluminum alloy doors and windows push and pull problems, to keep the door frame clean, especially the sliding slot cleaning.
Positioning pin, wind support, to spring and other aluminum doors and windows of the vulnerable parts, to always check, on schedule plus lubricants to keep clean and flexible. Broken aluminum doors and windows due to oxidation and rust, the knife can be used to gently wipe the aluminum rust, and then wash with soap and water, dry with a dry cloth, marked with wax and then polished with a dry cloth, the more smooth new. Seal the top and glass glue is to ensure that the aluminum doors and windows sealed insulation of the hub structure, if the fall to be timely repair, replacement. After the rain, should immediately wipe the wet glass and window frames. When cleaning aluminum doors and windows, do not step on the aluminum frame, do not pull the box for support.
