I blew 2 fuses in my amp in my car, i have replaced them both, one was a 30amp and the other a 20. The 30 amp was an inline fuse from the battery to the amp and the 20 amp was a standard 20 amp fuse in the amp. As i said i replaced both fuses and try the amp again and it wouldnt go. There is a LED light on the top just lighting up a logo, when i attatch the power from the battery the light goes off and when i disconnect it the light comes on. When i dissconect the power the red light for diagnose comes on.
This sounds like a wiring problem i reccomend you completly inspect all wiring to your amp if looks fine then use a test light and test all the wiring if all passes then your problem is within the amp itself. test the remote wire with stereo to car on if wired that way.
sounds like the power wire might be exposed somewhere and its shorting the system
