Angle valve leakage how to deal with?
If the interface leaks, as long as re wrapped with sealed raw tape, and then tighten it. Such as angle spool is bad, can only change angle valve.
If the angle spool is bad, can only change angle valve. If the interface leaks, as long as re wrapped with sealed raw tape, and then tighten it. Yijiale bathroom available copper angle valve, the price is very affordable, can go to compare.
Check wire joint is intact if there is no crack, cracking first replace wire connector, can also add pad to solve the problem Water Leakage;The connection is no problem, you can replace a new angle valve directly, the angle valve is not expensive, it is recommended to buy Copper angle valve.
Then need to do is to look at the inner joint is intact if there is no crack, cracking first replace wire connector, can also add pad to solve the problem of joint Water Leakage; no problem, direct replacement of a new angle valve, angle valve is not expensive, suggest to buy Copper angle valve.Industrial said angle valve: angle control valve in addition to the valve at the right angle, and other structures and through the single seat control valve similar. It is suitable for use in high viscosity, suspended solids and granular fluids, or in places requiring rectangular tubes. Its flow direction is generally bottom, side out. Under special circumstances, it can be reversed, that is, the flow side into the bottom. Triangle valve hot and cold two (to blue, red mark distinction), its material is the vast majority of manufacturers are the same, hot and cold signs, mainly to distinguish which is hot water, which is cold water.
