Anti-theft door of the cross key lock in the lock, and how quickly get out?
Prepare props: word, Phillips screwdriver, pliers 2, sewing needle 2, tweezers 1. The method is as follows: (1) the sewing needle with a fire red bend into a small hook-like, and then gently find the key to the place, found that the activities of the gap, to find a small pillar can be activities, in fact, the lock can lock , That is, a small bronze pillar can not be locked organs, and now with two needle hook off the key, slowly pulled out on the line. Can be used to help tweezers, if not, you can use a screwdriver to remove the position in the house to find the location of the key, with a needle stabbed out, and then took out. (2) the key to break the door in the lock, and first look at the key is not wrong, the correct location should be inserted into the key position. To find a medical tweezers try can not be taken out, if the tweezers could not, then find a bike gate wire in front of a small groove can try to hook out. (3) from the inside to remove the back cover of the lock, with a narrow iron bar or a little bit of wire, from the door inside the poke, you can cut off the key from the keyhole poke out. (4) If the above methods are no way to solve, then only to find a locksmith, and unlock the lockers are uncertain, only for a security door lock.
It is common practice to unlock the key when the key is unlocked. The most practical solution is: tweezers: a pair of pliers Fine wire cut off the key in the lock inside the ten thousand do not just dig, you can first use the tweezers to set the key, so that pliers can make the upper and then pliers can also take a fine wire, bent into a certain angle, the key hook If the above methods can not solve your problem, please help professionals
Use tweezers, needles, sharp nose pliers and other tools to try.
