Antiseptic wood production process?
After the anti-corrosion wood with anti-rotten, anti-termite, anti-fungal effect. It is used for outdoor wood flooring, and can be used directly in contact with water and soil. It is outdoor wood flooring, landscaped floor, outdoor wood platform, terrace floor, outdoor plank road and other outdoor preservative Preferred material.
【Antiseptic wood production process】 Production process: wood into the treatment tank → vacuum → injection of preservatives → step-up, pressure → decompression, drainage → after the vacuum → out of the tank. details as follows:
1, the first wood into the anti-corrosion equipment (treatment tank);
2, and then sealed, drained inside the air;
3, the vacuum state of the CCA preservative will be injected into the wood inside;
4, vacuum pressure (pressure) so that wood can be absorbed from the inside to the anti-preservative medicine, so as to achieve the effect of full osmosis;
5, decompression discharge excess preservatives;
6, once again vacuum, remove excess preservatives;
7, made of preservative wood cans.
Wood is a biological organism, used in outdoor and other environments, vulnerable to microbial and termite erosion, thus losing the value of commercial use. According to the use of domestic timber, the absorption of foreign wood preservative advanced technology, the use of "vacuum - pressure - vacuum" process, so that preservatives into the wood interior, this process is the best in the world, the application of the most One of the extensive treatment process, after the treatment of wood can effectively prevent the erosion of microorganisms and termite bite, even if the Jinan Sen home antiseptic wood in a very harsh environment, can also use more than 30 years.
