Approach to LED ceiling lamp wiring method
Fix the lamp base first; the grounding wire should be grounded first (the grounding wire is usually yellow green line);Connect the zero line, connect the power zero line with the lamp zero line (usually blue and black line);Then the switch will lead to the line of fire connected to the front of the lamp (usually red, white, yellow, green),A lamp specification is a terminal, this terminal is the most convenient; when the non terminal can be used for bobbin crimping, without crimping, only by splicing, splice length should be enough, usually hinged about 5 laps, and then the exposed insulating tape wrapped, so the lamp is connected good.Take it!
Best picture look at the ceiling structure or not sure which kind, the general ceiling lamps with ordinary lamp is not big difference, are divided into two poles, lamp manufacturers should do is internal, external line docking poles, in accordance with the drawings can be hung with ornaments
The two white lines driven by the LED are separated, one is connected with the driver, the other is connected with the yellow, and the other drivers are connected to the blue line of the white line. You have 4 drives, and the split switch has only 3 wires to control the 3 lights. The split switch is to turn the 4 lights on respectively (remote control, click on a light bar, press 2, then light one, then press full light)
Very simple ah, the inside of the ceiling lamp pulled out, respectively, with electrical adhesive tape wrapped separately on the line, there is no difference between the line of zero FireWire
Red and blue? Two red together, two blue together to form a pair of lines, and then separately in the 220V fire and zero, casually pick the root, regardless of color.
