Are autoclaved concrete blocks and ceramic hollow bricks the same thing? Can you send a picture to see
No, it is completely different, the production process is different. Autoclaved aerated concrete block ceramsite hollow brick
Autoclaved aerated concrete block is made of calcium powder (such as cement, lime) and siliceous materials (such as sand, fly ash, slag) ingredients added to the aluminum powder as the air-entraining agent, the water mixing, casting molding, Hair expansion, pre-cut cutting, and then by the high-pressure steam curing from the porous silicate block. Autoclaved aerated concrete block air supply, also known as air-entraining agent, is the key material for the manufacture of aerated concrete. Most of the starting agent used defatted aluminum powder. The aluminum powder in the slurry is chemically reacted under alkaline conditions: the aluminum powder is very fine and the resulting hydrogen forms many small bubbles and remains in the rapidly solidified concrete. These large numbers of evenly distributed small bubbles make aerated concrete blocks with many excellent properties. Lightweight clay clay made of concrete hollow block called ceramic tile, it has a fire, light, high strength, heat insulation, moisture and other advantages, the most suitable for the hollow frame building wall materials can also be used as old The buildings are re-spaced from the wall material. Easy to use, neat specifications. Construction can be free to cut, install the hose. Construction without water, clean the site, you can use the traditional cement mortar batch. Ceramic bricks are light in weight and transport costs are only one-third of red brick. Every 12.5 pieces of ceramic tile can be puzzle a square meter of the wall, the efficiency of three times higher than the red brick. Ceramsite does not contain acid and alkali, not weathering, cement bonded from fear of long-term flooding, the use of up to 50 years, built the building has Dongnuanxialiang effect.
