Home > categories > Machinery & Equipment > Brick Making Machinery > Automatic concrete brick machine bearing how to choose?
Question:

Automatic concrete brick machine bearing how to choose?

Automatic concrete brick machine bearing how to choose?

Answer:

In order to ensure the safety of the operator and equipment, to stop the repair, adjustment and finishing operations in the machine operation, to prevent the opening of the door. When checking the fasteners can loose, you should point to see the rotor on both sides of the pressure plate hammer plate pressure plate screws;
After repair or adjustment of the discharge port, you should first use manpower to change the rotor, recognize the rotor and other parts do not conflict and stuck appearance and can be sensitive to change
When the brick machine equipment plate hammer due to wear to be adjusted 180 ° re-use, should be equal to each plate weight and balance, in order to avoid the attack after the start of a sudden attack.
to avoid the pressure plate loose, the plate hammer reveals the rotor body, and the body impact, damage the machine. The following are the same as the "
When the fully automatic concrete brick making machine is running, it should always check whether the bearing seal of the equipment is. The grease in the bearing seat should be filled once every month. Every three months should be cleaned and replaced with oil frying. Normal after feeding, feeding together to be uniform, should be avoided mixed with iron hard objects;

Share to: