Big windowsill artificial stone countertops below without any support, how reinforcement
The following is paved should not be trampled like things happen, if your windowsill is not flat, you can consider the windowsill on the bench to remove the cement layer, the wood board 1.8 or MDF 1.2 tile in your windowsill , And then the table on the board, so there will not be much problem, but if your table out of the wall too much, more than 5 cm above, then you need to do iron angle bracket, or will crack open! Hope to adopt!
If the windowsill is not flat, you can consider the windowsill surface of the cement layer removed, the woodworking board 1.8 or MDF 1.2 tile on the windowsill, and then the table on the board, if the wall out too much more than 5CM, Use angle iron frame to reinforce.
Countertops under the pad of environmentally friendly sheet Lu Shuihe green core particleboard, so that the table more flat, uniform dispersion of pressure to improve the impact resistance. Planing board and the table between the aluminum alloy products, along the front of the table with water along the edge, to prevent the water from the table into the cabinet. Protect the table to extend the life. Countertops around the use of artificial stone reinforcement bar (note the four corners have reinforcement), to prevent the opening of the table break.
