Ask prawns: bike is in accordance with what standard to test? They say that under the condition of shock, there should be no problem. I wonder how this shock test needs to be done and how much test frequency is required How long will it take to test? What is the specific test method? Are there any standard references?
Bike test method:The first step: put the table with a coin to open the rear cover, remove the battery piece inside the reload, cover cover.The second step: operation the first step will come out later, a factory value of 2060, see 2060, the final 0 in beating. Next, take the 26 inch 1.95 tube, for example, with a perimeter of 2055.
At this point, use the left button to change the front 0 to the corresponding hour, press the right button to confirm, skip to the back of the 00 tune to the corresponding minutes.3, see the required interface at this time: the same display speed (km/hr), the following is the time.In that case, we'll adjust the time to the perimeter.The fourth step: installationPro before installation, put the table in the hand test to see if there is data1, the code header and the base card is good, then you have a hand with a transmitter, a hand with a magnet grinding back and forth, to see the speed above does not show, and if so, the parents to carry out loading.2. The meter header is mounted on the car, the transmitter is mounted on the right front fork, and then the distance between the magnet and the launcher is about 3MM.
The third step: tell me how to change the 2060 to 2055.1, just said out of the factory value, 2060 of the 0 in the beating, at this time, press the right button, the 0 to 5, and then press the left button (right this time is the number of adjustments, the left key to confirm the role)In the same way, other numerical adjustments.2, to 2055, and then press the left button to see a sign of the clock, and then 0:00At this point, the long press left key about 2 seconds or so, will come out 24 decimal, this is the clock modulation.Out of the 24 hexadecimal, press the right button, out of the form of 0:00.
