Bio fuels are made of what raw materials
In fact, the inventor of the engine Dishaier as early as 1912 Missouri engineering conference report said, "as for rapeseed oil engine fuel in today does not seem to have much sense, but the future will become the fuel and oil and coal as important". In 1983, American scientists first used rapeseed oil methyl ester as an engine to burn for 1000 hours. And the renewable fatty acid monoester was defined as biodiesel. In 1984 the United States and Germany and other countries scientists studied using fatty acid methyl or ethyl ester to replace diesel as fuel, which uses from animal or plant fatty acid monoester including fatty acid methyl ester, ethyl esters of fatty acids and fatty acid ester instead of diesel combustion
Maximum up to 30%-45%. Water can reduce the oil viscosity and improve the stability, but reduces the calorific value of oil; 2) pH value is low, so the storage device is the best corrosion materials; 3) greater density than water, and the water ratio is about 1.2; 4) with "aging" tendency, heating should not exceed 80 DEG C, Yi avoid light, avoid contact with air preservation; 5) good lubricating performance. Biodiesel can be used as fuel for boilers, turbines, diesel engines and so on.
Biodiesel (Biodiesel) is a kind of biomass energy, which is a kind of long chain fatty acid mono alkyl ester obtained by pyrolysis technology. Biodiesel is a mixture of complex organic compounds containing oxygen high, the mixture is mainly organic matter in some large molecular weight, including almost all kinds of oxygenated organic compounds, such as ethers, esters, aldehydes, ketones, phenols, organic acids, alcohols, etc.. Features: 1) high moisture content
