Butterfly valves are widely used in 2.0MPa below the pressure and temperature of not more than 200 degrees of various media, right?
5. butterfly valve structureButterfly valve mainly by the body, butterfly plate, stem, sealing ring and transmission components.(1) the valve body is cylindrical, and the upper and lower parts each have a cylindrical boss for installing the valve stem. Butterfly valve and pipe flange connection, such as the use of clamp connection, the minimum length of its structure.(2) stem, stem is the axis of the butterfly plate, shaft end adopts stuffing box sealing structure, can prevent leakage of medium. The upper end of the valve stem is directly connected with the driving device to transmit the torque.(3) the butterfly plate is the opening and closing part of butterfly valve.
First of all, is not the butterfly valve butterfly valve.Butterfly valve in the valve around the fixed axis rotating valve, called butterfly valve.1., as a sealed butterfly valve, it has been developed rapidly since the appearance of synthetic rubber, so it is a new type of shut-off valve. In our country until 1980s, the main role of butterfly valves in low-pressure valves, valve seat using synthetic rubber, by 90s, hard seal "metal seal" butterfly valve to rapid development. There are a number of valve factory can produce steady pressure metal seal butterfly valve, butterfly valve shall be shipped to a broader area.2. butterfly valves can transport and control the medium with water, condensed water, recycled water, sewage, sea water, air, gas, liquid gas, dry powder, mud, fruit pulp and a mixture of suspended solids.The domestic butterfly valve parameters are as follows:Nominal pressure: PN0.25 - 4.0MPaNominal diameter: DN100 - 3000mmWorking temperature: less than or equal to 425 DEG C
3. kinds of butterfly valve:According to the connection mode: flange type, clip type.According to the material of sealing surface, soft seal and hard sealing.According to the structural form, butterfly valves can be divided into the following types:Plate typeInclined plate typeOffset plateLever type4. butterfly valve features:(1) the structure is simple and the shape is small. The utility model has the advantages of compact structure, short structural length, small size and light weight, and is suitable for large caliber valves.(2) the resistance of the fluid is small, and when the valve is fully opened, the valve seat passage has an effective circulation area, so the fluid resistance is smaller.(3) open and close, convenient and quick, good adjustment performance, butterfly plate rotation 90 degrees can be completed headstock. By changing the angle of rotation of the disc, the flow can be graded.(4) the opening and closing moment is smaller, because the butterfly plate on both sides of the rotating shaft is basically equal to the medium, and the opposite direction of the torque is generated, so that the opening and closing is more labor-saving.(5) low pressure sealing performance, sealing surface materials generally use rubber, plastic, sealing performance is good. Limited by the material of the sealing ring, the pressure and the temperature range of the butterfly valve are smaller. But the use of hard sealing butterfly valve pressure and temperature range has been greatly improved.
