Cable bttz-4 * (1 * 50) and bttz-4 * 50 What is the difference
To use the video card at the same time connected to the computer monitor and TV show together, have to do the following: 1) graphics card must include HDMI, including two or more signal output interface. (Such as the shadow GTX650 there are DVI, VGA, HDMI three signal output interface.) As long as the graphics card to meet this requirement, no matter which brand can be. 2) graphics card HDMI interface has to support the original sound decoding, that is to say with the HDMI cable and TV connection will have a sound output. 3) in the TV or computer monitor line to use straight, can not transfer. Because a card when the transfer may not show. 4) After installing, enter the display adapter from the Start menu. The contrast display to set, to show the same content to select the copy; to display different content on the choice of expansion on it.
Note: Refer to 10kV and below Cable Trench Construction Standard and Acceptance Specifications Chapter III Cable Trench and Well Construction Standard Article 3
What is your video card? First must be a separate graphics card. If it is the result of the accumulation of porcelain porcelain puzzle, you give up it. Use the DVI interface to connect the computer monitor, connect the LCD TV with HDMI, in the graphics driver settings to nVIDIA graphics card, for example, install the driver, enter the display attribute drive settings interface, click the expansion window "nView", in the "nView Mode ", you can set to" copy "," horizontal span "or" vertical span "as needed. "Copy" means that the contents of the two displays are exactly the same. "Horizontal cross" means that the display of two monitors is connected in the horizontal direction, for example, we want to work in the main display, but also want to watch movies in the auxiliary display, which is a more applicable function.
There is no difference between BTTZ25 square can only do single core. BTTZ is a kind of outer layer with seamless copper tube jacket, the middle filled with magnesia crystal powder as insulation material, the conductor is a single strand of copper rods composed of new cables, in recent years are also more used in high-rise buildings, airports, Underground railways and other places, to protect the fire in the case of fire pumps, fire elevators, local lighting, emergency evacuation instructions, security monitoring, anti-smoke system and self-powered power and other important equipment uninterrupted operation. The main features of the editor it has a high temperature, fire, explosion, no combustion (250 ℃ can be a long time running, 1000 ℃ limit state can also be 30min short time operation) and the current flow, small diameter, high mechanical strength , Long service life, generally do not need the characteristics of independent grounding wire. Application range Editor Widely used in nuclear power plants, metallurgy, chemical industry, mine, kiln and other dangerous, bad, high temperature environment. In recent years, more applications in high-rise buildings, airports, docks, subway and other places, to protect the fire in the case of fire pumps, fire elevators, local lighting, emergency evacuation instructions, security surveillance, anti-smoke system and self Power and other fire fighting and important equipment without interruption.
