Home > categories > Electrical Equipment & Supplies > Power Cables > Can 110kv and 10kv cables co-share with trenches? What is the relevant specification?
Question:

Can 110kv and 10kv cables co-share with trenches? What is the relevant specification?

Cable 3 (4 × 185 + 1 × 95) What does it mean?

Answer:

With a straight pipe with a matching pipe (commonly known as the hoop), in order to prevent the joints at the slippery, PVC glue can be used after the smear. If the trouble, then use the electrical cloth cloth to the two tube package can also be strict.
The same is 1080P resolution, the computer with the TV is not full screen, it is possible that the frequency of computer graphics output and TV default frequency is different (the national standard is PAL50 Hz), so as long as the graphics output frequency into 50 Hz will be full screen. Win7 mouse right click, select the resolution, the remaining steps see below:
According to Article 22.7.1 of the Electrical Design Code for Civil Buildings JGJ16-. the transmission lines and the electronic information system transmission lines shall be laid separately and shall be shielded when they are close to the laying of them in parallel by the construction conditions. High-voltage cable under normal circumstances is not allowed and weak cable with the ditch laying. If the relevant control cable does need to be with the high-voltage cable ditch, should be laid on both sides of the laying and keep the distance, but also pay attention to control cable shielding measures.

Share to: