Can I use the servo motor?
Ok, red and white black to the nominal voltage, Yellow-green earth or protection zero I don't know how to answer the other nine, I don't know how to answer, haha
Can't use what you have said that four thread is U V W the servo motor controller, servo motor by the pulse signal, the line 9 is the servo motor, photoelectric encoder is to control the servo motor torque, speed and Angle.
You can use it as an ordinary motor, the premise is the drive still need to use, can be set to Cn001 is 1, speed control, select Cn002.0 is 1, do not use the input node SON control servo, servo power immediately started. The Hn505 is H010A, which selects the internal velocity; Sn201, you can set the speed you want. The two strands of the electric motor, the four line is the power, the three phase four line, the like you have been to the end to scrap more than n many RMB, the ninth line is the encoder line, must connect well. After this is done, you can be overqualified.
The servo motor is used as a general motor, and the method is not to use the driver. Without the drive, ac servo motor is a synchronous motor. Servo motor: Servo motor is an engine that controls the operation of mechanical components in servo system. The servo motor can control the speed, the position precision is very accurate, can convert voltage signal to torque and speed to drive the control object. Servo motor rotor speed controlled by the input signal, and can be rapid response, in the automatic control system, is used as actuators, and has a small electromechanical time constant, high linearity, initiating character such as voltage, can convert the received electrical signal to the motor shaft angular displacement or angular velocity on output. Divided into two major categories of dc and ac servo motor, its main characteristic is, when the signal voltage is zero no rotation, speed decreases with the increase of torque and uniform.
