Is it easy to bend? FiftyWhen the decoration is not pay attention to air drilling position, do half the ceiling, ceiling to the drilling location less than 20 cm, now only in the ceiling of the shaving machine, and then the tube from the ceiling inside the walk to the drill hole, about 1 meters from the drilling machine to wear out. In this case, the total length is more than 3 meters, and should be bent inside the ceiling once, can I ask the copper pipe can be connected longer? How much is it about 1 meters long? Can you bend while wearing? Professional answer, thank you!
Brass is generally long, can even take a long, but it is not recommended to do so, after the connection may be brass interface because of work outside the machine vibration when loosening, resulting in leakage, and inside and outside machine connecting line also needs to be lengthened. The price of copper tube is usually 80~150 yuan a meter. When the copper pipe is lengthened, it must be done after sale, and the sealing work is done.
I suggest you re drill the installation, the copper pipe can be connected long, but you take into account the condensate pipe water can only be low flow, or you open the air conditioning condensed water generated from the indoor flow out. And from the ceiling inside the tube, and bending, air-conditioning is not good.
The copper pipe can be connected long, and the price depends on the area. We have 1.5 horses, 80 yuan per meter, 2 100,3, 150 120,5. There are work difficulty, difficulty is appropriate to add. Copper bending if the technical clearance will not be a problem, it is too difficult to install side bending, it is better to unload first, then the pipe, and then a one-time installation.
