Cantilever pneumatic tapping machine bracket can be flexible to move, cantilever radius can reach up to 2 meters, there are 1.1 meters 1.8 meters Oh, because it is a stent, and some people will worry about attack out of the teeth is not straight! Attack the teeth straight, this is not straight according to the hole and the machine is related to the vertical, so the machine must be a good degree of vertical, okay Oh!
This should be the valve on the parts, how to design tooling, to combine your side of the process and product drawings, equipment, what? The machining center is a few axes, vertical or horizontal
Since it is also equipped with copper sets, it is recommended to re-repair the aperture, the oval 0.9mm really a little too large, if not repair can be processed into the copper sleeve than the upper limit of small size 0.05mm, sets of holes and then crashed into the workpiece , In the finishing, to prevent the copper sleeve also appears oval phenomenon
First find a rough reference to do positioning processing, and then find the basic reference processing, fixture according to the benchmark and the use of parts should ensure that the dimensional accuracy and position accuracy to determine the fixture clamping method,
You should pump the body, you should first find a rough base to do the processing of the main hole, and then the hole to do fine processing of other sizes, according to the processing benchmark to determine the fixture
Measurement, to the main size of the circumference as the standard, the size of the location can be too small, the inner diameter of the need to stay, after assembly I need to work
