Can the reinforced edge of the raft foundation be mechanically connected?
There are two kinds of edge banding: 1, longitudinal reinforcement, bent hook and interlaced edge banding. 2, U rib structure edge banding methodIn the first type, the bottom and top longitudinal bars shall be staggered 150. After that, a side structure steel bar shall be attached to the two interlaced bent hooks. Therefore, the design shall be considered as the way of sealing the edges
I think you should have a lightning strike on the line, and the cutting board on the line is connected in a circle,. Welding on the top of the steel bar on the line, if the mechanical connection, a class of joints in the tensile zone should be staggered 50%, in the compression zone
The connection point shall be no less than 10D